http://www.highway29records.com/aftermarket-harness/
Thanks for visiting our site!
Aftermarket Harness
Checkout Ebay Auctions For The Cheapest Prices
 |
 Aftermarket Radio Stereo Wiring Harness For Select 1992-2001 Hyundai Vehicles  US $4.99
|
 NEW METRA 70-1730 HONDA 2008-UP (PREM SOUND) AFTERMARKET RADIO INSTALL HARNESS US $12.00
|
| Powered by phpBay Pro |
Check out Amazon:
 |
Refrigrator Automatic Ice Maker Kit List Price: $124.65 Sale Price: $38.50  |
|
Replacement icemaker for ice thru-the-door or other (freezer mount) existing installations in most Whirlpool and Colspot refrigerators. This icemaker also replaces some older type icemakers. In some cases it can be used with the original wiring harness... |
 |
Frigidaire Ice Maker / Icemaker 5303918277, 218699501, M1 List Price: $90.15 Sale Price: $46.28 |
|
This is the bare icemaker replacement (doesn't include water valve or ice bucket) for most Electrolux/ Frigidaire refrigerators. It replaces the icemaker found in IM34, IM115, and IM501 kits. Related part number 218699501. |
 |
Supco SUPCO RIM900 UNIVERSAL ICEMAKER Sale Price: $44.18 |
|
THIS SUPCO RIM900 UNIVERSAL ICEMAKER IS AN AFTERMARKET REPLACEMENT FOR YOUR OEM WHIRLPOOL AND MAYTAG ICEMAKERS. RIM900 IS A DIRECT REPLACEMENT FOR A BURNT OUT MODULAR ICEMAKER. THIS IS A "BARE" ICEMAKER WITH NO ADDITIONAL WIRING HARNESSES... |
 |
2004-2006 Scion Xb JDM Bb C-pillar Strut Bar Sale Price: $39.99 |
|
for: 2004-2006 Scion Xb & Bb C-pillar Strut Bar |
 |
Metra Axxess ASWC Universal Steering Wheel Control Interface (Black) List Price: $75.69 Sale Price: $43.95 |
|
Universal Steering Wheel Control Interface |
 |
Metra 40-GM10 GM Antenna Adapter List Price: $9.95 Sale Price: $0.01 |
|
GM factory antenna with mini barbed or barbless plug for aftermarket radio |
 |
Metra 70-1761 Radio Wiring Harness For Toyota 87-Up Power 4 Speaker List Price: $5.95 Sale Price: Too low to display |
|
1987-Up Toyota wire harness |
 |
Polk Audio DB651 6.5-Inch Coaxial Speakers List Price: $119.95 Sale Price: $55.27 |
|
Turn up your vehicle's audio performance with the db651, a 6-1/2-inch coax speaker designed to drop into a variety of applications in no time at all. Advanced materials reduce component weight while offering rock solid reliability, advanced looks and ultra high performance... |
 |
How to Tune and Modify Engine Management Systems (Motorbooks Workshop) List Price: $29.95 Sale Price: $14.94 |
|
Drawing on a wealth of knowledge and experience and a background of more than 1,000 magazine articles on the subject, engine control expert Jeff Hartman explains everything from the basics of engine management to the building of complicated project cars... |
 |
Parrot MKi9000 Advanced Bluetooth hands-free car kit for iPod List Price: $199.99 Sale Price: $136.49 |
|
BLUETOOTH(R) SCREENLESS HANDS-FREE SYSTEM; NO NEED FOR A SCREEN SYSTEM OFFERS A VOICE MENU FOR ACCESSING ITS FUNCTIONS; BLENDS IN SEAMLESSLY INSIDE ANY VEHICLE; AUTOMATIC PHONEBOOK SYNCHRONIZATION; TRAINING-FREE MULTI-SPEAKER VOICE RECOGNITION; SPEECH SYNTHESIS OF NAMES IN PHONEBOOK; CONTACT MANAGEMENT UP TO 2000 CONTACTS PER PHONE |
Here are some more information for Aftermarket Harness:
There are a lot of Car Seats for Toddlers available for you to choose from. The most important to me is safety...Having five grand children it's essential that the one my kid's use is highly rated and it must have a 5-point harness. Properly installed and used they will significantly lessen the risks to your child and could even save their lives.
By law, drivers are accountable for making sure passengers under sixteen years of age are fastened properly. It is compulsory for anyone carrying children to make certain they are correctly secured and seated in a child's car seat, booster seat or seat belt. This includes all caregivers, from babysitters to grandparents. Not complying to do so may result in a fine, as well as demerit points on your driver's license.
To install forward-facing Car Seats for Toddlers, secure the tether strap, then use your body weight to fasten and secure the seat belt or Universal Anchorage System (UAS) strap.
Make sure that the shoulder straps are at or above the child's shoulders. Straps need to be snug, you should only be able to have room for one finger width between the strap and the child's chest. Stay away from aftermarket car seat products. They could become flying hazards or could have hard or sharp parts that could injure the child or other occupants in the event of a collision.
A Youngster can begin sitting facing forward when he or she has reached at least nine kg (20 lb.). To prevent forward movement in a collision, it is essential to use the tether strap precisely as the manufacturer recommends. If your vehicle does not have a tether anchor, to secure a Car Seat for Toddlers contact your local dealership or an auto repair shop to have one installed.
If you're a parent that takes automobile seat safety seriously...and like me want your children or grand kids to have the safest seat! Check out my review of the Britax Convertible Seat [http://hubpages.com/hub/BritaxRoundaboutConvertibleCarSeat]. Be sure to watch the videos at [http://hubpages.com/hub/BritaxRoundaboutConvertibleCarSeat].
How to Install a Aftermarket Radio in BMW E46
DESCRIPTION FOR BMW E46:
Install an XM Satellite Radio system in BMW E46. XM Satellite Radio is a U.S.-based nationwide radio service providing over 100 channels of music, news, entertainment, and sports. Since the service is delivered by two geostationary satellites in orbit, the digital quality sound can be received almost anywhere in the country.
RADIO INSTALLATION PROCESS:
PARTS NEEDED
1 - Pioneer XM Receiver/FM Modulator.
1 - Terk XM Antenna.
1 - European Antenna Adapter - Male.
1 - European Antenna Adapter - Female.
TOOLS NEEDED:
10 & 13mm sockets
Ratchet Wrench
Flat Head Screwdriver
Phillips Head Screwdriver
Electrical Tape
Coat Hanger or similar object
Electric Drill
1/8" Drill Bit for Metal
Dremel Tool (optional)
Sandpaper (optional)
INSTALLALING RADIO STEPS IN BMW E46:
If you have the NAV system, disassembly of the dashboard will be a bit different.
1. First, as always, disconnect the negative battery cable in the trunk with a 10mm socket
2. Remove the back seat. Take both cushions out and put them someplace where they won't be damaged
3. Let's mount the antenna in the center of the rear deck; there is a tie-down for children's safety seats.
4. The antenna fits perfectly still has a great view of the sky through the back window glass.
5. Feed the wires through the driver's side of the rear seat panel; there is a large bundle of wires going through the bulkhead.
6. Using a undone coat hanger, tape the antenna, control unit, and switching unit wires to one end of the object. Make sure you tape the correct cable ends that will attach to the XM-receiver hide-away tuner unit.
7. Open the trunk, pop out the two carpet rivets on the driver's side and pull the carpeting away from the trunk wall. You can now use the hangar to feed the cables into the trunk area . Pull enough cable through to reach the location where you plan to mount the hide-away tuner unit. Chose to mount my receiver up underneath the rear deck between my HK subwoofers.
8. Once you know how much wire you need in the trunk, the rest will be used for the antenna leads. Pulled the antenna wire slack into the trunk and zip-tied it into a coil. .
9. Take the control and antenna switching unit cables and run them under the driver's side door sills and trim to the front of the car. You do not need to remove the trim pieces to do this, just tuck the wires under the edge.
10. Using a Phillips-head screwdriver, remove the 3 screws holding the driver's side footwell cover. There is also one pop-rivet on the center console and two clips under the steering column .As you are removing it, unplug the chime, lamp, and the ODB-II connector.
11. Run the wires behind the dead pedal and up into the dashboard. I chose to loop them around a piece of the existing wiring harness to keep the XM wires from dangling or interfering with pedal operation.
12. Remove the shifter boot from the center console by pressing it in from the sides. You do not need to remove the boot or shift knob, just lift it up off the trim.
13. Remove the two screws under the boot and pull up on the center console trim .You will need to disconnect the two electrical harness connectors from the window switches. Put the trim aside.
14. Open the oddments compartment .Reach in and apply pressure to the roof of the compartment while pulling out. It will just pop out. This reveals the 2 upper ashtray screws
15. Remove these 4 screws and pull the ashtray assembly out. You will need to disconnect the 2 cigarette lighter wires, the harness connector for the ashtray lamp, and whatever connectors you have going into your DSC/Seat/Audio etc switches. Set the ashtray assembly aside for later.
16. Now, you can continue feeding your controller and modulator wires underneath the center console and into the area behind the ashtray. If you haven't done so, now is a good time to attach the antenna adapters to the XM antenna switching unit.
17. The climate control unit will pop out by reaching up behind it and pushing out. You do not need to disconnect this unit.
18. Time to remove trim. Using a protected screwdriver or trim remover, gently pull the right side trim panel out from the gap. The dashboard trim pieces are held in place using rubber grommets and long pins built into the trim. They should come out fairly easily. You will also need to remove the center trim piece in the same manner after the right side is removed.
19. There are now 2 screws revealed on either side of the radio. Remove these 2 screws and pull the radio out. You can disconnect the two antenna leads and the wiring harness if you need to. The wiring harness block is released by prying up under the tab on the connect with a flathead screwdriver. There should be a small graphic on the connector to illustrate this.
20. We want to tap into the larger of the two antenna connectors. Remove the big antenna connector and pull it down through the dash to the area behind the ashtray where the XM antenna switch unit now is. Attach it to the new antenna adapter and run the other antenna adapter back up to the radio.
21. Connect everything back up and slide the radio back into place and fasten the 2 radio screws back into place.
22. Replace the trim pieces and A/C control unit.
23. If you choose the Velcro, find a spot, clean it, attach the Velcro, attach the controller unit, and connect the controller wires. You are done. If you chose my way, then be prepared to do some custom grinding and finishing.
24. Using my Dremel Tool, Greg sanded and grinded the ashtray cup until the controller unit sat flush and level in the cup . He then drilled a hole through the back of the cup and ashtray assembly for the controller cable. When finished, he cleaned the surfaces, and used a black marker for touchup. It came out great and props go to Greg for the work.
25. Whichever way you chose to go, you can now put your dashboard back together, reconnect all wiring, and fasten all screws.
26. Connect your switched 12V source to your the red ACC wire, run the yellow fused wire to the positive battery terminal and ground the black wire to the metal vehicle body. I sanded the contact points where I was going to mount the XM receiver to the rear deck and it works just fine as a ground.
27. Connect your power, controller, antenna, and modulator plugs into your XM receiver and turn on your ignition. Check for power to make sure everything is working.
28. If you haven't done so, now would be a good time to get on
29. Decide where you want to mount the receiver, attach the angled brackets to the unit, and attach it to the desired location.
30. Now zip-tie the extra cabling, tuck it behind your trunk carpeting and go for a drive!
A word about the radio installation kit you are about to install. There are many manufacturers of radio installation kits for this vehicle. Each manufacturer produces slightly different variations of the same kit, and a few make individual kits for specific vehicles. The pictured installation kit shown in the illustrations below is a standard kit used for many. Radio installation kits change with the model and years of production of the vehicle. When selecting a kit for this vehicle, make sure the kit you purchase states on the package the installation kit will work with your vehicle model and year. Some kits may require additional setup. Certain kits may be multi function kits designed to work with multiple vehicles and may require the installer to remove break away screw mounting tabs attached to the kit that are not required for your particular vehicle.
About the Author
If you are looking for a good quality audio visit,
BMW fascia plates
and
BMW E46 Radioblende
for more information about car stereo products, and find the right accessories for your car.
trying to install an aftermarket stero in my 84 cutlass. The wirring harness has already been cut before.?
I tried doing it without any help and the most i can get it to do is eject and load CD. I think i have the ground and costant but no remote any help or hints would be much apreciated.
here are the codes that i've found most valuable and useful( check in at the local auto parts store and look on the back of the wiring harness they usually have the correct codes) power=blue/white ignition=yellow/red ground=black illumination=red/black the rest of the wires are the speaker leads.
Sikorsky Aerospace Services to Perform A-to-L Upgrades on Royal Saudi Land Forces’ BLACK HAWK Helicopters
SHELTON, Connecticut | Sikorsky Aerospace Services announced today the signing of a contract with the Royal Saudi Land Forces Aviation Command (RSLFAC) to upgrade its fleet of BLACK HAWK helicopte...
Thanks for visiting!
