http://www.highway29records.com/sound-deadener/
Thanks for visiting our site!
Sound Deadener
Checkout Ebay Auctions For The Cheapest Prices
 |
 DYNAMAT EXTREME NOISE REDUCER SOUND DAMPING 36SQ.FT BULK PACK FOR AN ENTIRE CAR  US $165.15
|
| Powered by phpBay Pro |
Check out Amazon:
| Account limit of 2000 requests per hour exceeded. |
Here are some more information for Sound Deadener:
OK, here's the deal: If you want to build a quality stereo system, SOUND DEADENING IS NOT OPTIONAL; IT IS MANDATORY.
Why is that?
Let me ask you a question: Do you want to hear music, or road noise? Do you want your license plate to be quiet, or rattle when the bass hits? Do you want to hear your tires, or do you want to hear MUSIC?
I know I want to hear the music, and as such, I never do a real car stereo installation without using sound deadening material.
So, with all of that said, let's take a closer look at sound deadening.
Sound deadening comes in many forms, but the two main types are spray on, and matting.
Spray on deadening comes in either an aerosol spray paint can or in a large bucket. The aerosol can is great for small jobs, but if you plan to go crazy with the deadening, you'll want to buy it in bulk. When you buy it in bulk, you'll also need a nozzle of some sort. Usually this can be purchased with the large bucket of sound deadening. This type of sound deadening material works best for tight areas, and where you want a medium amount of sound deadening.
The other kind of sound deadening comes in sheets and is applied with an adhesive on the back of the sheet. This deadening is more difficult to work with, but much more effective than the spray-on type. It is usually used on larger areas, or where more deadening is needed.
Because sound deadening can get expensive, the smart installer installs it where it is most effective. To figure this out, take a drive in your car with the radio off. Listen to where the most noise comes into the vehicle. The main places I look to deaden are around the wheel wells, the firewall (of course), the doors, the roof of the trunk, under the rear seats, and under the center console.
SO! Check out those places, check out any other place where noise comes through, and start figuring out how much material you'll need.
This rule should go without saying, but get more material than you think you'll need. The reason for this is because once you have the material installed, you'll want to do a second listening, only this time with the music turned on. You will most definitely find rattles that weren't noticed before. You will probably also find some places where you'll want to bulk up on sound deadening.
When reproducing music, noise and distortion are your biggest enemies. Sound deadening will go a long way towards fixing these problems.
In addition to silencing road noise, sound deadening works great for reducing rattles in your vehicle. For example: Say you just mounted some high powered speakers in your doors. Because vehicle manufacturers never intend for high powered speakers in the doors, they aren't designed to handle the vibrations.
To fix the vibrations (which sound HORRIBLE), just cut out a ring of sound deadening material, and apply it to the spot where you mount the speaker. Mount the speaker to the top of the sound deadening material, and be sure the speaker is bolted down tightly. Now, try turning up the stereo again. Did this fix the problem? If not, try applying another layer of sound damping material.
Another trick: Have you ever noticed that certain panels in your vehicle vibrate when certain bass frequencies play? Get some of the spray-on sound deadening material, and apply it to the back of the panel to dramatically decrease the vibrations. For larger panels, use sound deadening sheets.
Another trick: Does your license plate rattle when the bass hits? Don't look like an idiot, fix it! Take some sound deadening material, and apply it to the back of the license plate and the license plate frame. Try the bass again, only this time you won't embarass yourself when you drive through a parking lot!
Good luck and good sound!
-Honest AEB
Alan Bayer is an entrepreneur and car audio enthusiast. He runs an eBay store selling car stereo install supplies:
http://stores.ebay.com/honest-aebs-autosound/
He also has a GREAT website with car audio articles (such as the one from above). Also on the website, learn about car audio equipment, how to find the best equipment, how to install it, and save big bucks in the process!
[http://www.honestaebs-caraudio.com/]
Subscribe to Honest AEB's FREE Car Audio Magazine at:
[http://www.honestaebs-caraudio.com/magazine.html]
Sound Proofing Materials
Even if you can get the best of the materials available for soundproof, it will not be of much use unless they are properly put in place. Hence they have to be installed at the time of the construction of your house itself. Though you can still take advantage of the material once the construction is over, it is certain that it will not be as effective as that in a pre-construction phase.
Insulation is a way of blocking the unwanted sounds that come from outside. While you make your interiors soundproof, the ideal place to begin with is the floor. The floor insulation is a cheaper option. It also provides an effective soundproof between your floor and the adjacent floor or adjacent building. This insulation is provided by materials such as rock wool which are laid between the floor joists in the attempt to absorb sound. However, another good choice of insulation is cellulose that is spread into the place.
You can make your windows impervious to sound by using a kind of glass with a special quality. The glass panes that effectively block the outside noise are coupled ideally with thick sealing. You can use curtains or blinds to block the sound that might still make its way into your room. There are several other kinds of material that are effective sound blockers.
Acoustic foam otherwise known as open celled foams are best to catch sound. Soundproof material is also available in the quality of vinyl. It is called as Mass Loaded Vinyl (MLV) which has the double advantage of lightness as well as higher mass. This heavier mass gives it the required sound-blocking properties.
It is to be remembered that soundproofing is different from that of sound absorption. Absorption is that kind of sound improvement wherein the effect of sound is deadened in a conference room, recording studio or in a home theater. It restricts the entry of other noises and maintains only the positive sounds in the room. In another method of soundproof, people go to construct an extra stratum of wall in the room, with a little space in between. This space is the main absorber of sound thereby enhancing the sound quality pervading in the room.
You can buy sound proofing materials from online stores at discount price. View more such quality products at Shop All Things
About the Author
Mike Bordon is a renowned SEO professional and author of many articles and e-books. Presently he is working as the editor of spotwriters. You can contact him to get your articles done.
is Fatmat Trunk Sound Deadener better than dynamat??
i found it a lot the Fatmat Trunk Sound Deadener cheaper than dynamat, thats why i have the doubt. but according to them it is better. can somebody verify??
They are very much alike and they both work but Dynamat has some product lines that are better than Fatmat. Standard Dynamat Dynaliner is just a bit better than Fatmat. Extremeliner by Dynamat is far superior to any product Fatmat sells.
Why police thought Lindy killed her baby
TAPE recordings of police investigating Lindy Chamberlain for the suspected murder of her baby Azaria have been released for the first time.
Thanks for visiting!
